Horizontal and Vertical Shooting Waterproof Case for DJI Osmo Action 3/Action 4/Action 5 Pro Camera,Underwater 45M/148FT Deep Diving Protective Shell Housing with Quick Release Mount

7 reviews for Horizontal and Vertical Shooting Waterproof Case for DJI Osmo Action 3/Action 4/Action 5 Pro Camera,Underwater 45M/148FT Deep Diving Protective Shell Housing with Quick Release Mount

1. 

   Rated 5 out of 5

   – January 8, 2024 Prof. Maureen O’Hara

   I do lots of driving video and I know the Action 5 is an action camera, but I still have fear. Having this on make me feel safer when driving especially when there is a lot of construction going on. I do a lot of driving tours of new construction homes and there is always ongoing construction, and I fear all the dust flying around. I love this case.

2. 

   Rated 5 out of 5

   – January 14, 2024 Justyn Fisher

   Nicely made case, fits perfectly and seals well. Materials seem to be solid. This is hard to test right now because its February and 20 degrees in NY. Hoping to get it submerged at depth this summer, but I would say that this will definitely protect the camera from dirt and debris (on construction sites) on my shoots as well as protecting it from the elements. Taking it to any depth puts significant strain on the case and water can enter, so if you plan to dive with your camera, read the manufacturer instructions and test it at the depth you plan to use it before installing the camera.

3. 

   Rated 5 out of 5

   – April 3, 2024 Dr. Giles Johns DVM

   Very innovative solution so that I can shoot vertical videos underwater. I also like that I can mount an underwater LED directly to the case which is another plus.

4. 

   Rated 5 out of 5

   – April 6, 2024 Reina Vandervort

   This is a nice kit and allows the camera to be mounted vertically. It also allows the camera to go deeper in water due to the case. It adds protection as well. It is as described so 4 stars.

5. 

   Rated 5 out of 5

   – June 18, 2024 Missouri Terry

   I really like the ability to mount this with the vertical or horizontal mount. I’m using the ‘vertical’ mount even though I still have it mounted horizontally and the flexibility this provides enables me to use a much simpler mount with less gear and less of a chance it gets caught on something or bounced out of place. I added a ¼-20 eye bolt to it to attach a safety lanyard.

6. 

   Rated 5 out of 5

   – June 25, 2024 Molly Grant

   The media could not be loaded.This waterproof case fit my DJI Action 5 pro camera perfectly. (I did have to remove the protective silicone ring from around the metal lens cover to put the camera into the case.)The two button pass-through points correctly line up with the power on/off and “start/stop” button. NOTE: You can not use the touchscreen when the camera is inside the case, so be sure to set your mode/settings before putting the camera into the case.The o-ring seal and cam lock look to do a great job sealing the case. The only possible water ingress points would be past the button pressing mechanisms. Although they are spring loaded and have o-rings, my plan is to start the camera recording before going underwater and not touch the buttons under water.So far I have only taken it down to about 23 feet (deepest part of my local lake) so I can’t talk about if it is actually waterproof down to 45 meters / 148 feet as it claims, but from the thickness of the plastic and experience with other dive cases I don’t see any reason why it shouldn’t be.

7. 

   Rated 5 out of 5

   – November 13, 2024 Carmen Zboncak

   Even though my DJI Osmo Action 4 should be fine with my intended use of filming while snorkeling, I wanted a more robust case. This KETOPKIN housing is a great solution for that.First, it fits the camera snugly and perfectly. Since I won’t be taking it in the water until it warms up I tested by immersing it in a sink full of water for about an hour. Absolutely no leaking at all.An important bonus feature is the cold shoe so I can use one of my under water lights on camera for a lighter rig than I usually use.They included screws and an Allen wrench to attach the action camera mount to the case, either horizontally or vertically.The plastic is crystal clear and it’s easy to use the controls, very responsive.At about $20 when I ordered this is a good value accessory.